Figure-8 Loop & Follow-Through
A strong, easy-to-inspect fixed loop tied on a bight or retraced through a closed attachment point.
When to use it
Life-support tie-ins, harness attachment and anchors where a bulky but highly inspectable termination is preferred.
Step 1
Form a bight, cross it over the doubled standing part and leave enough rope for a full turn.
Step by step
Step 1
Form a bight, cross it over the doubled standing part and leave enough rope for a full turn.
Step 2
Take the bight completely around the standing part to form the figure-eight shape.
Step 3
Pass the bight through the first loop. For a closed ring, retrace the original knot with the tail instead.
Step 4
Dress every pair of strands parallel, remove crossings and set all four legs firmly.
Cautions
- A crossed or poorly dressed figure eight is harder to inspect and can bind severely after loading.
- Leave the tail length required by your employer and rope manufacturer; add the specified backup where policy requires it.
Training aid only. Follow ANSI Z133, your employer's policy and the manufacturer's instructions for every piece of equipment.